All posts by FortyTwoBlades

The Real Douk-Douks

The French Douk-Douk knife is arguably much more famous than the Duk-Duk secret society of the South-Pacific Tolai people from which it derives its name. Photographs and drawings of actual Duk-Duk members (who acted as enforcers of tribal spiritual and civil order sometimes quite brutally) are scarce and difficult to track down amongst the throngs of images to be found of the knives that bear the name. We’ve gathered a number of images and arranged them here for those curious in knowing more about the figure behind the iconic tool.

We do not own any of these pictures. If you are the copyright holder of any of them and wish them to be removed, please let us know.

Duk-DukCultists1 Duk-DukCultists14 Duk-DukCultists9 Duk-DukCultists11

Ron and Elx”Ron and Ella Lucas's photos of Tolai Duk Duk dancers, about 1964, at Navunarm, 10 miles out of Rabaul, these are from a Tamori

Duk-DukCultists15 Duk-DukCultists12 Duk-DukCultists4 P1140514 Duk-DukCultists3 Duk-DukCultists6 Duk-DukCultists7 Duk-DukCultists10 Duk-DukCultists13 Duk-DukCultists8

 

Vintage American Scythe–Offset Seymour Ironclad

A fully restored and tuned Seymour Ironclad swing socket snath outfitted with an Emerson & Stevens “Clipper” grain cradle blade adapted for haying use. The snath has been significantly shaved down, the nib blocks replaced with ones of improved fit (the upper one having been modified for proper interface) and new grips installed on the original nib irons. The hardware has been electrolytically de-rusted and thoroughly cleaned, the whole tool having been given a protective clear coating.

IMG_1682 IMG_1684 IMG_1687 IMG_1688 IMG_1693 IMG_1695 IMG_1696 IMG_1700 IMG_1702 IMG_1705 IMG_1707

 

Solving the Tomahawk Handle Knob Problem

Shown here is a 350g Rinaldi “Calabria” hand axe with a modified handle. A common complaint raised regarding slip fit handles is that (despite their virtues) a knob is either small or totally absent, meaning there is little or nothing to stop the hand from slipping off the end of the handle if a loose grip is used. A simple tapered cross-pin at the end of the handle creates a removable solution to this problem.

A tapered hole was bored with a small step drill and a wooden pin, tapered to match, driven into the hole. The single-sided pin with the projection to the outside of the hand is the most comfortable and secure arrangement vs. a finger-sided or double-sided projection, and if the head must be removed from the handle for use as an independent tool the wooden pin is easily driven out so it does not obstruct the removal of the head. This provides several notable advantages over the use of a lanyard: the user’s hands may slide freely along the handle as needed to adjust grip position, the handle may still be immediately released in the event of an emergency or accident, and the pin allows  the end of the handle to be tucked under a belt and have it stay there nicely if the user’s hands need to be free without setting the axe on the ground.

Right Side Left Side Left Side of Pin Pin viewed with the bit of the axe facing the viewer. Pin viewed with the bit of the axe facing away from the viewer. Angled detail view, right side. Angled detail view, left side.